Feature

●【2 inch Hubcentric Wheel Spacers 6x135 to 6x135 GARAGE CHECKING】Enter your Year/Make/Model in system garage filter, then check fit(AMAZON CONFIRMED FIT to validate product fitment to your vehicle. locates Top Left of your desktop or Center of your mobile).
●【Hubcentric Wheel Spacers 6x135 to 6x135 PARAMETER】Thickness:2 inch| Vehicle Bolt Pattern:6x135| Wheel Bolt Pattern:6x135| Thread Pitch:14x1.5| Hub Bore:87.1mm | Out Diameter:175mm| Recommended Install Torque:85-90 Ft/Lbs| Package Include:2 pcs Hubcentric Wheel Spacers with Thread locker glue.
●【PERFECT PERFORMANCE】It can increase tire clearance, fix brake clamp clearance problems, allow the installation of wider and larger tires, Provide your vehicle with a more aggressive stance and appearance.
●【INSTALLATION】ONLY work after market wheels with 6x135 Bolt Pattern.In add,your Vehicle hub bolts size MUST equal to this Wheel Adaptersthread pitch 14x1.5.Requires standard tire repair tools, a torque wrench, and lug socket.Check and re-torque all hardware, including open-end lug nuts securing adapter to wheel hub after some 50-100 miles.
●【Why We Choose Grade 10.9 Lug Bolts? 】While 12.9s are stronger but less ductile which is an issue in a failure scenario. Pre-installed heat treated 10.9 grade studs are more appropriate in the sense that they have higher plastic strain energy, or in simpleton terms: will tend to deform rather than snap.10.9s are more than sufficient for a car application in terms of strength and for the reasons mentioned above are more desirable than 12.9s.


Description

wheel spacerswheel spacers
wheel spacerswheel spacers
fitments

fitments

  • for Expedition 2015-2023
  • for F-150 2015-2023
  • for Lobo 2015-2021
  • for Navigator 2015-2023

please note

  • This spacer adapter includes open end lug nuts to secure the spacers onto your factory hubs

If your factory thread size is different Need to purchase a set of open end lug nuts in the correct thread pitch (your factory thread pitch) to complete the installation

Your Factory wheel studs may extend past the surface of the wheel spacers. In this case you will need to:

1) Shorten the factory studs

2) The wheels need to have the open slots (cavities) between mounting holes.

3) Purchase a set of shorter studs and replace them with the factory studs.

Video Player is loading.
Current Time 0:00
Duration 1:21
Loaded: 3.28%
Stream Type LIVE
Remaining Time 1:21
 
1x
wheel spacerswheel spacers
wheel spacerswheel spacers

Product information