●Compatible vehicles and Installation are listed in Description. If you dont make sure these spacers are same as your original ones, please message us ●Vehicle Bolt Pattern: 5x4.75"(120.7 mm); Wheel Bolt Pattern: 5x4.75"(120.7 mm); Thread Pitch: 12x1.5; Thickness: 2"(50 mm); Hub Bore: 3.43"(87.1 mm) ●Comes with Grade 10.9 wheel studs and open ended lugs that have a 12x1.5 pitch. CNC Machined with 60 degree taper and made of Top Quality Grade 6061-T6 Aerospace Aluminum ●Mainly used to give your vehicle more agressive stance & better handling characteristics, and will help with any clearance issues if the issues trouble you present ●Installed by a trained professional is highly recommend. The all adapters must get a FULL 6-8 turns of the lugs when tightening. Make sure no gap between the spacers and the hub of the wheels
[Pack of 4 Black]
[Pack of 4 Sliver]
Description
Specifications
Vehicle Bolt Pattern: 5x4.75"(120.7 mm)
Wheel Bolt Pattern: 5x4.75"(120.7 mm)
Thread Pitch: 12x1.5
Thickness: 2"(50 mm)
Hub Bore: 3.43"(87.1 mm)
Installation Tips
Installed by a trained professional is highly recommended.
Torqued down to Factory Specs before installation.
Please check and test carefully after installation. Or may result in damage to your vehicle.
The back of the adapters must sit flush against the vehicles hub.
No gap between the adapter and hub.
If your OEM studs are longer than the adapter, please replace with shorter ones, which is recommended. Also, you can grind/cut them shorter, which is not recommended.
Stable, Reliable, More Controllable
1. CNC Machined
2. 10.9 Grade Lug Nuts
3. Surface ANODIC OXIDATION Treatment
4. Forged T6 6061 Billet Aluminum
Wheel Pattern Instructions
4-LUG: Middle of two holes directly across from one to another.
5-LUG: Back of the hole to the center of the second bolt hole.