Feature
●【2 inch Hubcentric Wheel Spacers 5x115 to 5x115 GARAGE CHECKING】Please verify the bolt count,bolt circle diameter,center bore,and bolt size match your vehicle before ordering.Enter your Year/Make/Model in system garage filter(AMAZON CONFIRMED FIT)to validate product fitment.
●【Hubcentric Wheel Spacers 5x115 to 5x115 PARAMETER】Thickness:2 inch| Vehicle Bolt Pattern:5x115| Wheel Bolt Pattern:5x115| Thread Pitch:14x1.5| Hub Bore:71.5mm | Out Diameter:150mm| Recommended Install Torque:85-90 Ft/Lbs| Package Include:4 pcs Hubcentric Wheel Spacers with Thread locker glue.For Amazon Secondary Packaging, if you only receive 2pcs, please email us and we will reissue the rest for you
●【PERFECT PERFORMANCE】It can increase tire clearance, fix brake clamp clearance problems, allow the installation of wider and larger tires, Provide your vehicle with a more aggressive stance and appearance.
●【INSTALLATION】ONLY work after market wheels with 5x115 Bolt Pattern.In add,your Vehicle hub bolts size MUST equal to this Wheel Adaptersthread pitch 14x1.5.Requires standard tire repair tools, a torque wrench, and lug socket.Check and re-torque all hardware, including open-end lug nuts securing adapter to wheel hub after some 50-100 miles.
●【Why We Choose Grade 10.9 Lug Bolts? 】While 12.9s are stronger but less ductile which is an issue in a failure scenario. Pre-installed heat treated 10.9 grade studs are more appropriate in the sense that they have higher plastic strain energy, or in simpleton terms: will tend to deform rather than snap.10.9s are more than sufficient for a car application in terms of strength and for the reasons mentioned above are more desirable than 12.9s.
Description
fitments
fitments
If your factory thread size is different Need to purchase a set of open end lug nuts in the correct thread pitch (your factory thread pitch) to complete the installation
Your Factory wheel studs may extend past the surface of the wheel spacers. In this case you will need to:
1) Shorten the factory studs
2) The wheels need to have the open slots (cavities) between mounting holes.
3) Purchase a set of shorter studs and replace them with the factory studs.
