Feature

●Fitment: Power Steering Pumps Replacement for Altima 2007-2012 ,Maxima 2009-2014 ,Murano 2009-2014 Power Steering Pumps Assembly
●Reference OE# Direct fit 21-5485, 215485, 491101AA0A, 49110JA100, 49110ZX70A, 49110ZX02A, 491109N00A, OE Design For Direct Fit, Form And Function For An Simple And Fast Installation.
●Function：Power steering pump converts power steering fluid from the reservoir to the steering gear to keep the wheels in good running condition. Reduces symptoms such as noise from turning the steering wheel, sluggish response and body stiffness.
●Superior Quality：Power steering pump is made of high quality material, which can guarantee maximum strength and durability, and long service life.
●Easy to use： Power Steering Pump is simple to install, easy to use, plug and play, and can directly replace the old or damaged ones, providing you with the greatest convenience.


Description

ZonCar Power Steering Pumps

1.1.

When did you need to change the Power Steering Pumps？

11

11

KAX Control ArmKAX Control Arm

KAX Control ArmKAX Control Arm

Leakage Phenomenon

Squealing sound

Difficulty in turing the wheel

Squealing sound

FAQs

1.Why is the pump making a whining noise all of the time?

A whining pump is usually caused by air in the power steering system. Inspect the reservoir for proper fluid level. If fluid has foam or air bubbles present, air has entered the system or has not been properly bled (ensure all hoses/clamps are tight). Some systems require special vacuum bleeding procedures.

2.Should I ever change my fluid, even though nothing is wrong?

Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicles O.E. manufacturers recommendations on fluid change intervals.

3.I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?

The pulley may have cracked upon removal. If the shaft was mushroomed before removing the pulley, it has now enlarged the bore in the pulley. The pulley must be replaced.

Please Check the Fitment Before your purchasing

Catalytic ConverterCatalytic Converter

Product information