Prepare All calibrated components should meet the maximum flow requirements. Please clean the interfaces and joints before installation to effectively avoid bringing dust into the gas path. Note that the airflow direction and arrows on the product body are pointing correctly, and that the port and thread sizes match.
|
Pressure Regulation Pull up the pressure gauge knob and turn: If you turn clockwise, the pressure will rise steadily. As you turn counterclockwise, the pressure drops. Stop turning and lock the knob when you reach the desired index, forget this step and you may run into leak problems.
|
Dial to read Make sure that the pressure gauge is tightly mounted on the main body, and pay attention to whether the reading rises and falls smoothly when adjusting the pressure.
|
Auto Drainage Drainage column will automatic excrete if there is no pressure,and it will close during the air flow passing. When the water level is beyond upper limit, drainage is necessary, otherwise that will cause poor dehumidification.
|