[48 Feet White]
[48 Feet Gray]
[23 Feet Gray]
|
|
|
|
---|---|---|---|
Effective Leaf GuardStainless steel mesh with super-fine openings, the mesh is designed to block pine needles, leaves, seed pods and debris. |
Water Absorbing MechanismThe mesh can absorb water quickly, easily handle large water flow of heavy rain and strom weather. |
Built for DurablilityMade of weather resistant stainless steel material, with epoxy-coating finish as double protection for the mesh, strong and light-weighted. |
Universial SizeFits standard gutter up to 5 wide, 22ft long, and easy to cut and bend to fit any roof and gutter system, including k-style gutter system. |
Tools you may need(not provided):
Caution:
Wear Personal Protective Equipments such an safety glasses and gloves when you handle this product.
You may need a ladder for the installation,make sure it is secure before you step on it.
Indicates a hazardous situation that,if not avoided,may result in minor or moderate injury.
Measure your gutter form front edge to back edge,take a 5 gutter for example.
|
|
|
|
---|---|---|---|
Standard installation 1If the gutter is installed against (or very close to) the fascia wood,slightly lift up the shingles and slide the gutter guard under the shingle, and rest the front edge (of the gutter guard) on the lips of the gutter, and secure the gutter guard with the self-drilling screws provided. |
Standard installation 2If the gutter is installed away from the fascia wood (a gap between gutter and fascia),lay the gutter guard on top of the gutter, and secure gutter guard with screws provided. The mesh of the gutter guard is bendable, bend to fit if necessory. |
Bending installation 1For some roof system, which the shingles are adhered to the roof , do not try to pry up the shingles, instead, you can bend the gutter guard to fit (extra screws will be needed). See Bending installation 1&2, Choose bend down installation or bend up installation to fit your roof. |
Bending installation 2For some roof system, which the shingles are adhered to the roof , do not try to pry up the shingles, instead, you can bend the gutter guard to fit (extra screws will be needed). See Bending installation 1&2, Choose bend down installation or bend up installation to fit your roof. |