Feature(may vary by option.)
●DURABLE - This is all aluminum rain gutter guard, that wont get brittle over time, its much stiffer and sturdier to stay in place and have longevity.
●EASY TO USE - Our gutter mesh is easy to cut and shape, and easy to install. Please ensure your gutters width before buying.
●EFFECTIVE - The aluminum mesh roofing gutters can keep a lot of debris out of the gutters, fix the problem of gutters clogging, and you no longer have to go up on the roof before each rain.
●APPLICATION - You could do a DIY installation with the gutter netting. This gutter webbing can also be used as a bird barrier or used for the bottom of wooden fencing to resistant to small creatures.
●CUSTOMER SERVICE - If you have any questions about our aluminum mesh gutter guards, please feel free to contact us for solutions.
[5Inch X 50Feet]
[5Inch X 42Feet]
Description
The package of our roof gutter screen contains one roll of aluminum gutter leaf-guard mesh and a pair of thicker gloves. No instructions in the box.
Our leaf filter gutter protection roll can provide a porous cover for your rain gutters, letting water through but keeping leaves and small sticks out. The low maintenance gutter protection is very useful to avoid clogging trench drains.
Guide to the Installation of Mesh Leaf Guards:
We recommend cleaning your gutters before installing the gutter covers.
The flexibility of the aluminum wire mesh was tough, and the top and bottom edges may scratch up your hands, please remember to put on gloves before you start to install the leaf guards for gutters.
Once completing installation, the gutter cover system will immediately do the job of preventing leaves from getting in the gutter.
Method One:
- In this method, no screws or fasteners are needed. The other tools may need: a ladder, measuring tape, a screwdriver, and wire cutters.
- As the sides of the mesh are sharp, make sure you use gloves. Then start on one end and measure down your gutter.
- As you start to install the gutter guard, squeeze with both hands to make it into a half moon, bend the gutter cover gently along the long edge. and then fit the gutter screen down into the gutter with both hands as you move down the gutter.
- Keep the mesh in the "humped shape", pushing it down and positioning it evenly. You can use a small screwdriver to poke in a hole and lift up and adjust the gutter guard roll mesh to further shape the hump if needed to a more even shape.
- The gutter covers screen should be rounded and secure just above the level of the gutter. The tension will hold it in place, making the aluminum gutter mesh more of a slightly curved surface.
- You can cut the micro mesh gutter guard into sections and do a section at a time, or continue down the gutter without cutting as you move your ladder.
Method Two:
- In this method, the other tools may need: a ladder, measuring tape, some self tapping sheet metal screws, and wire cutters.
- As the sides of the micro-mesh aluminum gutter guard are sharp, make sure you use gloves. Then install aluminum screen gutter guards flat on top of the rain gutters.
- Tuck one end of the aluminum gutter protector under your shingles and use self tapping sheet metal lathe screws to secure them to your gutter.
- You can cut the stop clogged gutter guards into sections and do a section at a time, or continue down the gutter without cutting as you move your ladder.