Feature

●High quality WS-6903 Satellite Meter, perfect for the systems without automatic satellite tuning capability. Its very convenient for installer to catch the signal quickly and accurately and adjust the antenna to the best position.
●For the systems without automatic satellite tuning capability. Connect to your LNBF and receiver to the satellite finder to track the clearest setting for the satellite you wish to tune to.
●Meter with LED display helps you know the strength of the signal clearly. Meter with audio tone helps you align satellite antenna to signal.
●Audio signal gets louder at the better setting. Works with multiple dish systems. Close or open the audio tone.
●With four steps gain for the satellite signal,you can increase or decrease the gain of the meter


Description

Specifications:
Frequency Range: 950-2150MHz
Input Level Range: -40dBm ~ 10dBm
Impedance: 75Ohm
Supply Voltage: 13-18V DC
Operating Temperature:0~40 degree
Package size: 12.7 * 8.5 * 3.3cm / 5" * 3.3" * 1.3"
Weight: 73g/2.6oz

Package included:
1 * SATLINK WS-6903 Satellite Finder Meter

Connection and Operation
1. Connect a jump cable from LNB to satellite finders “Satellite”port. Connect the "Receiver" port.
2. Make sure that satellite finder is properly connected Plug in the AC card and turn on the satellite receiver.
3. Set the dB to be one or 2 by ATT button, then signal LED will show form 15 to 30, then you can adjust the dish position, when you hear the buzzer alert and the value of signal strength will be more and more, that means you get the satellite signal.
4. Set the dB be 3 or 4, adjust the dish again and again until the value of signal strength is maximum, now you can see the LOCK light in the satellite receiver, if the Look light is lighting, that means you find the desired satellite, Otherwise you need to adjust the dish again.

Important Notes
1. Do not place the satellite finder front of dish.
2. When using high gain LNB, and the gain is more than 60dB, insert a 5 dB attenuator between LNB and satellite finder, or replace the jump cable GR-59U.
3. The max length for cable from dish to satellite finder is 5 meters.