Feature

●oscilloscope kit, digital oscilloscopes be used basis for secondary development and transformed into millivoltmeters, data loggers and other instruments.
●with waveform parameter digital display, including frequency, period, pulse width, duty ratio, mmaximum.
●available rising or falling, the previous waveform be observed before the negative delay, and the waveform display be at any time hold function.
●oscilloscope multimeter, cortexm3 stm32f103c8, and include 2.4inch color tft display screen.
●come with instructions, easy to install and operate, with auto normal single modes, easy to the moment waveform.


Description

Feature:
1. With TFT controller recognition and waveform storage function, will not lose the waveform after power off.
2. Short?circuit and open?circuit detection: can help the user find out the soldering error, the SMD has been soldered, more suitable for electronic beginner.
Specification:Item Type: Digital Oscilloscope Material: Engineering plastic
Purpose: DIY oscilloscope
Maximum Real-time Sampling Rate: 1MSa/s
Analog Bandwidth: 0-200KHz
Sensitivity Range: 5mV / div-20mV / idv
Maximum Input Voltage: 50Vpk (1x probe)
Input Impedance: 1MΩ / 20pF
Accuracy: 12 bits
Record Length: 1024 points
Coupling Mode: DC / AC / GND
Time Base Range: 500s / Div-10us / Div
Trigger Mode: Automatic, normal and single
Trigger Position: Buffer center
Power Supply Voltage: DC 9V (8-10V)
Package List:1 x Oscilloscope1 x Test Chuck1 x User Manual
Note:Please note that the kit does not include a power supply, users need to prepare their own power supply, the power supply current should be able to provide more than 200mA. 9V is recommended