1. The mirror adopts high quality tempered glass, high transparency and easy to clean.
2. Hd screen, let the operation and data see more clearly, give you a better experience.
3. Small size, save electricity. Ergonomic design, small size, portable.
JDS2012A Oscilloscope parameters
Oscilloscope Technical Specifications:
Maximum sampling rate: 200MSa / S
Channels: 1
Bandwidth: 20MHz (can be measured 33MHz)
Vertical Resolution: 8 bits
Input range: 10mv-5v; 100mv-50v (probe X10) (1,2,5 steps)
Vertical Accuracy: + / -3%
Impedance: 1M 25pF
Coupling: AC
Display mode: Y-T
Input voltage: 40v (probe X10); 400v (probe X10) 220v voltage can be measured; (probe X100) 2000v voltage can be measured
Time Base Range: 10ns-50ms (1,2,5,5 step) 100ms-5s (Scan scan)
Memory Depth: 2K
Modes: Auto, Normal and Single
Type: rising edge, falling edge
Automatic detection: Support (50Hz-40MHz)
Measurement: peak to peak and frequency
Cursor: Cursor support time and voltage
Screen: 3.2-inch, 16-bit true color, TFT, 320 * 240
Battery: 3000 + mA lithium battery (single cell about 7 hours of continuous work)
Size: 202 * 100 * 35 (mm)
Multimeter Technical Specifications:
Full-scale reading: 4000 count
voltage: 400mv/4.000v/40.00v/400.0v/1000v 5 files
AC voltage: 400mv/4.000v/40.00v/400.0v/750v 5 files
Resistance measurement:400.0/4.000K/40.00k/400.0k/4.000m/40.00m 6 files
Capacitance measurement: 51.20nF/512.0nF/5.120UuF/51.20uF/100uF (30Sec) 5 files
Off detection: less than 60 when the buzzer alarm
Diode measurements: 0v-1.5v
JDS2022A Oscilloscope parameters
Input
Input coupling AC
Channel 2
Display mode X-Y;Y-T
The input impedance 1M 25pF
The maximum input voltage 40V(Probe X1);400V(Probe X1);2000V(Probe X100)
Probe attenuation 1X,10X
Attenuation setting 1X,10X,100X
Signal acquisition system
Sampling method Real time sampling