Feature

●Basic parameters: input AC85V-AC265V, output AC85V-AC265V,two channels,five different working modes, maximum load current 10AMP, package includes:receiving controller,housing,two remote controls (including built-in battery),and instruction manual. It is widely used in various types of electric curtains, garage doors, lamp holders, electric fans, water pumps, electric blinds, electric awnings, etc.
●Wireless Remote Control: It adopts 433MHz radio frequency technology and rolling code anti-interference technology. The remote control can control multiple receivers simultaneously without interference, In an ideal environment, the control range is 300 feet, while the actual control range is 100 feet.
●Professional power management: Input range AC85V-AC265V.we will not shoddy work and use inferior material,There are overvoltage protection, overcurrent protection,over temperature protection,over power protection,and short circuit protection,When the above situation occurs on the circuit board, the power supply of the product will automatically disconnect.
●Easy to Install:There is no need for too complex and crowded connecting wires,just connect the power supply to our product, and then connect the product directly to the equipment to be controlled.
●Five different working：1.Toggle mode:Press button A,Output1 output power supply,Press button A again,Output1 off.2.Momentary mode.3.Latched mode The product can be connected to a forward and reverse AC motor in this mode (the motor must haveforward and reverse functions).4.Toggle and Momentary mode.5.Delay mode(5 seconds,10s,15s,20s).
●No need for complicated operations, just choose the working mode you want on the dial switch (you can also switch the working mode freely during the product operation)


Description

Basic parameter

Operating Voltage AC85V-AC265V
Output voltage AC85V-AC265V
Maximum load current <10Amp
channel Two Channel
Operating Frequency 433MHZ
Receiver Sensitivity -107dbm
Remote control type 1527 learning code
Remote control range In the ideal open environment control range is 300feet, the actual range is 100fet
Professional power managementProfessional power management

Professional power management: Input range AC85V-AC265V.we will not shoddy work and use inferior material

  • Over voltage protection
  • Over current protection
  • Over temperature protection
  • Over power protection
  • Short circuit protection
  • When the above situation occurs on the circuit board, the power supply of the product will automatically disconnect.

Easy to InstallEasy to Install

Easy to Install

  • There is no need for too complex and crowded connecting wires,just connect the power supply to our product, and then connect the product directly to the equipment to be controlled.
  • Attention: Before connecting the wiring, the power supply must be disconnected.

working modeworking mode

Latched modeLatched mode
Latched mode, The product can be connected to a forward and reverse AC motor in this mode

  • Press button A the motor forward, then press button A again to stop the motor.
  • Press button B the motor reverse, then press button B again to stop the motor.

Five different working modes can be set

No need for complicated operations, just choose the working mode you want on the dial switch (you can also switch the working mode freely during the product operation)

  • Toggle mode
  • Momentary mode
  • Latched mode
  • T+M mode
  • Delay mode(5s、10s、15s、20s)
T modeT mode

Toggle mode

  • Press button A,Output 1 output power supply,Press button A again,Output 1 off
  • Press button B,Output 2 output power supply,Press button B again,Output 2 off

T modeT mode

Toggle mode

Momentary modeMomentary mode

Momentary mode

Latched modeLatched mode

Latched mode

5s5s

5 second delay mode