Specifications:
Model: DDS5188
Phase number: single phase
Type: guide type
Display mode: LCD
Rated voltage: 220V
Rated current: 5-32A
Working temperature: -25 ℃ ~ 55 ℃
Rated frequency: 50-60Hz +/- 10%
Accuracy level: level 1 (equivalent to measurement error <1%)
Including S0 port 2000Imp/kWh (ti = 80ms)
Relative humidity: 95%
Size: as the picture
Weight:98g
Wiring diagram:
Test: The meter has photoelectric coupling type electric pulse test output port, located in terminal button box (as shown in figure 2), + 5 VDC of the test equipment connected to 20" + "terminal, S connected to 21"-" terminal.
Installation considerations:
1.Electric meter should be installed in indoor ventilated and dry place, adopt 35mmDIN standard guide type installation, the bottom plate of the electric energy meter shall be fixed to the rigid refractory, non-vibrating wall.
2.The bottom plate of the electric energy meter shall be fixed to the rigid refractory, non-vibrating wall.
3. The installation should be in accordance with the wiring diagram, preferably with a multi-strand copper wire, avoiding the abnormal or burning of the electricity meter because of the bad contact.
4. When the electricity meter is correctly connected to the power grid, the power indicator of the meter is on
5.The load capacity of the electricity meter is 0.05ib ~ Imax (direct access)
6.Pulse indication: when the red light on, indicates that the power pulse is detected
Package Included:
1 x Din-rail energy meter