Application
It has a pull of 2000 lbs and is suitable for cars, trailers, trucks, yachts, ships, and marine winches.
Specifications
Color: Black
Type: Electric
Material: Steel, Aluminum, Copper, Plastic
Surface Treatment: Plastic Spraying
Motor: Permanent Magnet
Model: P2000-4
Voltage: 12V
Motor Power: 0.3KW
Gear Ratio: 465:1
Pulling Capacity: 2000LB
Working Load: 2000LB
Breaking Strength: 2400LBS
Hook Size: 1/4 inch
Battery Cable Length: 5m/16.4ft
Wired Remote Control Cable Length: 3m/9.84ft
Steel Wire Rope Size: Φ4.8mm*9.2m/0.19inch*30.18ft
Product Size: 24.5*25.6*19.6cm/9.64*10.08*7.72inch
Package Size: 39.5*29.5*25cm/15.55*11.61*9.84inch
Net Weight: 11kg/24.25lbs
Gross Weight: 12kg/26.45lbs
Notes
1. Please do not overload the electric winch.
2. Please make sure to add lubricating oil to the gears and shaft sleeves before use to prevent winch wear caused by an oil shortage.
3. Before pulling, the clutch must be tightened all the way clockwise.
4. If you encounter a problem caused by the clutch not being tightened: 1) if the tension is too low, you cannot pull the boat. The machine will make the sound of gears falling off. 2) the marine winch will stop working regularly. 3) the cable will not be locked and the wires may slide out. 4) the winch may pull for a few seconds and then stop working. Please do not pull the boat directly after tightening the clutch. Please roll the cable in to release tension first. If this is not done, the winch can be restored to normal use.
5. If the electric winch is frequently used for a long time, the winch gear and shaft sleeve should be regularly checked for oil shortage, and the steel wire rope should be worn. If severe wear is found, the use should be immediately stopped to prevent danger.