Feature(may vary by option.)
●Size: The thread size of 8AN is 3/4-16UNF. OD of brab: 1/2 inch.
●Material: Made of aluminum alloy 6061-T6.
●Seal: The AN side of the flare is sealed by a 37 degree angle.
●Parameter: Working pressure: 1500PSI; Working temperature: -65°F-252°F.
●Easy installation: Just push the barb end of the fitting into the hose. It is recommended to use clamps to ensure a tight seal.
[8AN to 1 & 2 inch 90 Degree]
[6AN to 5 & 16 inch-2pcs 90 Degree]
[8AN to 1 & 2 inch-2pcs Straight]
[6AN to 3 & 8 inch-2pcs Straight]
[6AN to 5 & 16 inch-2pcs Straight]
[8AN to 1 & 2 inch-2pcs 90 Degree]
[6AN to 5 & 16 inch 90 Degree]
[6AN to 3 & 8 inch 45 Degree]
[6AN to 3 & 8 inch Straight]
[6AN to 5 & 16 inch 45 Degree]
[8AN to 1 & 2 inch 45 Degree]
[8AN to 1 & 2 inch Straight]
[6AN to 5 & 16 inch Straight]
Description
-
-
NPT Male to Barb Fitting
EVIL ENERGY provides NPT to barb fittings with striaght, 45 degree and 90 degree.The NPT side is sealed with tapered threads
-
Push Lock Hose Fitting
EVIL ENERGY provides push lock hose fittings with striaght, 45 degree and 90 degree. The push lock hose barb only compatible with rubber fuel line.
-
PTFE Hose End Fitting
EVIL ENERGY provides PTFE hose fittings with striaght, 45 degree and 90 degree. The PTFE hose end can be work with PTFE fuel line ONLY.
-
Swivel Fuel Hose End Fitting
The swivel fitting is working with nylon braided and stainless steel fuel hose. Widely used in fuel systems, such as oil gas line, braided fuel line , turbo line, etc.
-
AN Male to Hardline Fitting
Applicable to stainless steel or aluminum hardline tubing. Widely used in brake systems, oiling systems and cooling systems.