Specification:
Item Type: Digital Temperature Controller
Material: ABS
Thermal Resistance: -199.9~600.0℃
Parameter List: Setted up
Voltage: AC100-240V
How to Use:
1. Hold down the MODE key and press the SET key to enter parameter settings. The current parameter prompt is displayed on the screen.
2. Press the SET key every time to switch to the parameter setting.
3. If you need to set this parameter, release all keys and press the MODE key to enter the setting value of the parameter prompt.
4. Press the MODE key to switch blinking bits. Press the SET key each time to add value.
5. After setting the parameters, hold down the MODE key and press the SET key to confirm. When the last set of parameters is used, the parameter setting state will exit.
6. Automatically exit after 60 seconds of pressing no button in the setting mode.
Package Contain:
1 x Digital Temperature Controller
1 x User Manual