Feature

●Air Space: 0.75 Cubic Feet Per Sub
●Sealed Enclosure
●10" 4 Ohm Subwoofer
●Peak:500 watts/RMS:250 watts
●Class D Mono Amplifier


Description

Double Cab Dual 10" Sealed Enclosure:

• Air Space: 0.75 Cubic Feet Per Sub
• Mounting Depth: 5"
• Width 49" x Top Depth 3-1/2" x Bottom Depth 7-1/2" x Height 18-1/2"
• High Quality MDF and Black Carpet
• High Quality Binding Terminal Cups (Accepts Banana Terminal Plugs OR Bare Wire up to 10GA)
• Fits behind the rear seat, remove plastic panel-tray from back wall. Sit cabinet in place, raise the back of the seat slightly, cabinet will drop into place.

Harmony Audio HA-R104 Rhythm Series 10" 4 Ohm:

• Peak:500 watts/RMS:250 watts
• Sensitivity:86.1dB
• Frequency Response:30Hz-1.5kHz
• Mounting Depth:5 5/16"
• Mounting Cutout Diameter:9 1/4"
• Min Sealed Box Volume (Cubic F):1.0-2.46
• Min Vented Box Volume (Cubic Ft):1.18-1.97
• Metallic Polypropylene Injection Molded Cone
• Butyl Rubber Surround
• Tinsel Leads Woven into Spider
• 1.5" Copper Voice Coil
• Steel Basket
• Ferrite Magnet
• Kapton Former Material

46CXA4001 Class D Mono Sub Amplifier CXA400.1:

• 1 Ohm Stable
• Three-second turn-on/off delay
• Variable 12dB crossovers
• 6dB variable bass boost
• 24dB subsonic filter
• FIT+(Fail-safe Integration Technology-PLUS)
• Accepts up to 40-volt input signal
• 300 Watts x 1 @ 2 Ohm RMS/600 Watts x 1 @ 2 Ohm PEAK
• 400 Watts x 1 @ 1 Ohm RMS/800 Watts x 1 @ 1 Ohm PEAK
• Frequency Response: 25Hz - 200Hz
• Signal to Noise Ratio: 95dB
• Input Sensitivity:
• High level 250mV-10V
• Low level 125mV-5V
• Active Crossover: 12dB/octave, variable 50-200Hz, low pass only
• Subsonic Filter: 24dB/octave high-pass fixed @ 25Hz
• EQ Boost: Variable to +12dB, centered @ 40Hz

Includes Harmony Audio HA-AK10 Amplifier Install Kit