We specialize in providing safe and reliable products to industry. Provide various types of tools to change the way of life, including industrial control, tools, mechanical transmission, electrical and electrical, general equipment, fastening hardware, labor insurance, laboratory and office supplies, intelligent manufacturing, instruments.
Specification:
Capacity: 8mL
Temperature: fire 1300 degrees centigrade;iron 450 degrees centigrade.
Fuel: Pure Butane(Not Included)
Package List:
1*Gas Soldering Iron
1*Iron Head
1*Holder
2*Tweezers
1*Steel Wire Coil
1 Bag of Accessories
Users Manual:
1. Filling Gas
1) Fill the iron with high quality gas and confirm the OFF on the switch.
2) The gas tank into the air hole (gas iron bottom),press it to inflate.
3)It takes about 10 seconds to complete the filling gas, wait for a few minutes, the gas is stable, then use.
4) If after the gas injection, the tail has the silk exhalation sound, press the air port slightly with the tip of the pen, the sound can be eliminated.
2. Ignition
1) Push aside and close to ON and hear the sound of silk.
2) Ignition near the joint with a dozer or lighter. Let the gas keep the iron hot.
3) After the ignition, adjust the firepower, turn to on for larger fire and off for less power.
4) The temperature of the second product is as high as 1300 ° C. It is safe to use and turn off the switch after using it.
5) When using gas soldering iron, please pay special attention to wait until the flame is completely extinguished and the object in the soldering iron turns red. The flame should not be too large to prolong the life of the soldering iron.
6) Flame length about 1.5-2.5 CM.