Feature

●Size - Inner Girth: 680mm / 26.78"; Outer Girth: 755mm / 29.73"; Top Width: 17mm / 0.67"; Thickness: 11mm / 0.43"
●Rubber Belt - Polyester wires are embedded in the rubber for strength, bending resistance and uniform load. Neoprene rubber has good resistance to oil, heat and wear.
●Features - To link two or more rotating shafts to transmit power in a drive system. Even load distribution on belt drives and good wear resistance.
●Applications - For all general drives for drive systems of lawn mower, tractor, snow blower, bandsaw, drill press, box fan, trimmer, etc.
●Note - Confirm the Size before ordering. Accurate measurement of v-belt length should be done with a belt measuring tool or a soft ruler, not a steel ruler. The width and thickness of the belt should also be measured to confirm the type of belt.

[920mm 2]




[920mm 1]




[980mm 1]




[980mm 2]




[725mm 2]




[725mm 1]




[1000mm 1]




[1000mm 2]




[680mm 2]




[700mm 1]




[700mm 2]




[1020mm 1]




[850mm 2]




[1020mm 2]




[1050mm 2]




[820mm 1]




[850mm 1]




[880mm 2]




[1080mm 2]




[880mm 1]




[1080mm 1]




[710mm 2]




[1050mm 1]




[1130mm 2]




[930mm 1]




[1130mm 1]




[680mm 1]




[900mm 2]




[686mm 1]




[900mm 1]




[930mm 2]




[686mm 2]




[710mm 1]




[820mm 2]




[737mm 1]




[737mm 2]




[1100mm 2]




[1100mm 1]




[1200mm 2]




[1200mm 1]





Description

V-BeltV-Belt

Drive Belts

  • V-Belts are the most common type of drive belt used for power transmission. They provide the best combination of traction, speed transfer, load distribution, and extended service life.
  • Made of neoprene rubber material, high-temperature resistance, wear resistance, corrosion resistance, high coefficient of friction. The outside fabric wrap is treated with high oil and heat resistant.
  • Fit for many industrial applications, agricultural machinery, engineering machinery, etc.
  • Proper belt tension and pulley alignment should be maintained during operation. Too little tension may cause slippage and wear on the belt and pulleys; too much tension makes the stress on the belt, pulleys and shaft too great.

Measure the length of the required belt:

  • To accurately measure the length of the v-belt, use a belt measuring tool or a soft ruler, not a steel ruler.
  • The width and thickness of the belt should also be measured to confirm the type of belt.

Installation:

  • First, loosen the tensioning device, then press the v-belt into the pulley groove by hand, and finally tighten it again.

V-Belt V-Belt V-Belt V-Belt V-Belt V-Belt
Drive Belt Drive Belt Drive Belt Drive Belt Drive Belt Drive Belt
Type A B C O SPA SPB
Width 13mm 17mm 7/8" 10mm 1/2" 16.3mm
Thickness 8mm 11mm 0.55" 6mm 10mm 13mm