Exceptionally Strong & Heat Resistant PC/ABS alloy Filament - 1.75mm Industrial Filament, - Please note that PC-ABS is industrial PC filament that need a Chamber Temperature of 【90˚C - 100˚C】for successful layers adhesion. Polycarbonate-ABS filament, considering its fantastic properties, is also quite budget-friendly compared to some more exotic carbon fiber-filled stuff. It doesnt shrink much upon cooling and will withstand the high temperature application in the summertime, with the sun shining! For hard, strong, stiff, functional parts you wont find better than polycarbonate /ABS filament 1.75mm. Clean & Dry Enough - Carefully winded to avoid any tangling issues, dried and vacuum sealed with desiccant. Use Adhesion surface, it will help hold down the print and prevent it from warping. Calibrating your printer before printing is necessary. It is recommended to use an enclosure when printing. For the large part it is recommended to use a heated chamber. It is recommended to anneal the printed part right after the printing process to release the residual internal stress. PC-ABS Applications - PC-ABS filament characteristics make it ideal for automotive interior parts such as dashboard, door handles or instrumental panel. Our PC-ABS 3D printing filament polycarbonate is very easy to electroplate. PC-ABS Printing Settings - Nozzle: 260˚C ~ 270˚C; Bed: 90˚C ~ 105˚C; Chamber: 90˚C ~ 100˚C; Speed: 30mm/s ~ 50mm/s; Fan: Off; Bed Surface: almost any surface with a thin coat of PVA glue; Drying Settings: 75˚C for 6h. Annealing settings: 90˚C for 2h. Recommended. PC-ABS Mechanical Properties】 - Tensile Strength: 42 ± 1.0 (MPa); Charpy Impact Strength: 400 J/m