Features:
2.8TFT LCD Module, 240x320 High resolution.
2.8inch, 4-wire SPI serial bus, driver chip is ILI9341.
This 2.8 TFT LCD Module can be can be easy controlled, such as AVR, STM32.
It can be used in any embedded systems which require display colorful image.
Perfect upgrade true color.
Support 3.3V input voltage
Specification:
Material:LCD Screen
Size: 2.8 inch
Control chip: ILI9341
Resolution: 240*320
Display area: 43.20)W)*57.60)H)
Interface type: 4-wire SPI interface
Number of pins: 18pin
Display color: 262K full color
Working temperature: -20~70 degrees
Pixel size: 0.18*0.18 (mm)
Working voltage: 3.3V
Display type: TFT
Weight:16g
Structure:
Interface:
PIN No.SymbolDescription
1GNDGround
2RESETLCM Reset pin is active low.
3SCLThis pin is used serial interface clock in 4-wire 8-bit serial data interface.If not used, this pin should be connected to IOVCC or GND.
4D/C-4-line system (D/CX): Serves as command or parameter select.Fix to IOVCC level when not in use.
5CSChip select pin (Low enable)
6SDASerial input .The data is applied on the rising edge of the SCL . If not used, fix this pin at IOVCC or GND
7SDOSerial output .The data is outputted on the falling edge of the SCL . If not used, open this pin
8CNDGround
9VCCPower supply for LCM (2.8V-3.3V)
10LEDAAnode of Backlight (3.0V-3.4V Typical:3.2V)
11LEDK1Cathode of Backlight
12LEDK2Cathode of Backlight
13LEDK3Cathode of Backlight
14LUDK4Cathode of Backlight
15XLTouch panel control pin
16YUTouch panel control pin
17XRTouch panel control pin
18YDTouch panel control pin
Package Included:
1x TFT LCD Display (without touch panel)
Note: This model without touch panel