Feature
●Precise Size: The Insert rabbet router bit set with 1/2" shank, 1-1/2 cut dia, cutting height 15/32", The rabbet bit itself rabbet depth is 3/4", full length 2-19/32", replacement knife size 12x12x1.5mm, Includes the following: hex key, screw M3x8, 12 collars and 2 ball bearings.Max RPM 22000
●12 Collars: The Insert rabbeting bit set can be changing the collars on the twin ball bearing guide steps the cut width in 15/32" increments from flush through 3/4". bearing 12 collars diameter as 1 1/2", 1 3/8”, 1 9/32, 1 1/4”, 1 1/8", 1 16", 1", 7/8”, 13/16", 3/4", 5/8”, 9/16", to cut 13 rabbets of different depth as 3/4", 1/16", 7/64", 1/8", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8", 7/16", 15/32".
●Various Cutting: The Insert rabbet router bit set can be cut 18 Different Depth rabbet, there are 17 different rabbet sizes available, Between the standard and optional collars, enabling you to cut a wide range of rabbets.
●Quality Blade: The Insert rabbet router bit reversible and replaceable inserts made of Ultrafine C3 carbide, details as below. Inserts are ground by 5 axis CNC machines to ensure the sizes tolerance less than 0.000787” (0.02mm) , lnserts can be rotated or replaced without removingthe bit from the router, cost saving, economical.
●Bit body: The Insert rabbeting router bit made by SCM440 Steel, heated to hardness 35-40HRC to ensure the body and the crews strong enough and could be used years. Bit body was fully ground and made by 4 or 5 axis CNC machining center, so that inserts could be mounted accurately and easily. Bit body is black oxided finish for anti-rust.
●Widely Used: This Insert rabbeting bit set suitable for Hardwood, Softwood, MDF, Particle board, Plywood, Acrylic, different wood composites, aluminium or other Non-ferrous metal, using on portable router or router table
[Insert Rabbet Bit with 12 Collars-1 Insert Rabbet Bit]
[1 & 2 Shank Insert Rabbet Bit with 17 Collars Insert Rabbet Bit]
[1 & 4 Shank Insert Rabbet Bit with 8 Collars Insert Rabbet Bit]
[1 & 4 Shank Insert Rabbet Bit Insert Rabbet Bit]
Description
Insert Carbide Rabbet Router Bit Set 1/2 Inch Shank Replacement Knife, 1-1/2 Cut Dia, with Interchangeable 12 Collars, Rabbeting Router Bit for Cut Various Rabbets, by Sinoprotools
12 Different Depths With 1 Tool, This Insert Rabbet tool features four sided replaceable carbideknives and a reduced cut depth capacity. used on hand held and table mounted portable routers.
package Include:
1 * Insert Carbide Rabbet Router Bit
1 * allen screw
1 * hex key
12 * Individual collars
12 collars size:
D=1 1/2"(38.1mm): cutting width 3/4
D=1 3/8”(34.92mm): cutting width 1/16
D=1 9/32(32.54mm): cutting width 7/64
D=1 1/4”(31.75mm): cutting width 1/8
D=1 1/8"(28.57mm): cutting width 3/16
D=1 16" (26.98mm): cutting width 7/32
D=1"(25.4mm): cutting width 1/4
D=7/8”(22.22mm): cutting width 5/16
D=13/16"（20.63mm): cutting width 11/32
D=3/4"(19.05mm): cutting width 3/8
D=5/8”(15.87mm): cutting width 7/16
D=9/16"(14.29mm): cutting width 15/32
Safety instructions:
1. Please wear good protective measures and always wear eye protection during using, in case of wood chips splash damage eyes.
2. Please keep the router bit away from children to avoid get hurt, because this cutter is sharp enough.
3. Examine the router bit before use for cracks or chips.The router bit must be fully inserted and tightened.
4. The router bit is suitable for softwoods, chipboard, MDF, plywood compact board; Avoid cutting ferrous metals and non wooden materials, iron, etc.
5. When not in use, please put the router bits set in the plastic box.