Feature

●STANDARD INLET: This pneumatic grinder has a 1/4in air inlet and is equipped with a standard air inlet connector for easy installation and use.
●PORTABLE DESIGN: Industrial grade pneumatic grinder, small size, light weight, low running vibration, with ergonomic grip, which is easy to operate.
●HIGH EFFICIENCY: The air die grinder has 3in grinding disc, and the no load speed can 10000rpm, which greatly improves the grinding efficiency.
●GOOD MATERIAL: The pneumatic grinder made of zinc alloy material, the handle is wrapped in a red protective cover, safe and reliable.
●SCOPE OF APPLICATION: The pneumatic grinder suitable for local grinding areas, removing solder joints and rust spots on metal products, and deburring wood products, etc.


Description

Specification:
Item Type: Air Die Grinder
Model: YDE-8982B
Disc Size: 3in (75mm)
No Load Speed: 10000rpm
Air Pressure: 90psi (6.3kg/cm²)
Air Consumption: 4.0cfm
Air Inlet: 1/4in

Package List:
1 x Air Die Grinder
1 x Sanding Pad
1 x Wrench
1 x Intake Port

Note:
Operation Suggestion:
1. Before and after use every day, please inject 2?3CC of #60 pneumatic lubricating oil (sewing machine oil) from the air inlet
2. Let the machine idle for a few seconds after filling with oil
3. Generally, the air source compressed by the traditional air compressor contains water, and the lubricating oil in the air compressor brought out by the air compressor piston. If the oil water separator is not used, the water and oil enter the pneumatic tool with the air, which will cause wind If the blade is stuck, once the tool is started, the blade will not be thrown away, and it may not even be able to start. If it can be started, the torsion will be insufficient. Be sure to pay attention to refueling regularly to keep the tool at normal torsion.