Feature

●Zinc Alloy Shell: The pneumatic die grinder shell is made of zinc alloy, is wear and resistant.
●Comfortable To Grip: The pneumatic grinding machine is designed with long straight handle, and the handle is wrapped with red protective cover, which is comfortable to hold.
●Low Noise: This industrial grade pneumatic air mill has compact size, with muffler device, has light vibration and low noise during operation.
●Wide Applications: The pneumatic grinding machine is used for local grinding spot areas, to remove solder joints and rust spots on metal products, to deburr wood, or for automotive polishing.
●No Load Speed: 20000rpm, Air Pressure: 90psi (6.3kg/cm2), Air Consumption: 4.0cfm, Air Inlet: 1/4in


Description

Specification:
Item Type: Air Die Grinder
Model: YDE 4952
Material: Zinc Alloy
Collet Size: 1/4in(6mm) or 1/8in(3mm)
No Load Speed: 20000rpm
Air Pressure: 90psi (6.3kg/cm²)
Air Consumption: 4.0cfm
Air Inlet: 1/4in
Overall Length: Approx. 280mm / 11in

Package List:
1 x Pneumatic Grinder
2 x Wrench
1 x Intake Connector

Note:
Operation Suggestion:
1. Before and after use every day, please inject 2?3CC of #60 pneumatic lubricating oil (sewing machine oil) from the air inlet
2. Let the machine idle for a few seconds after filling with oil
3. Generally, the air source compressed by the traditional air compressor contains water, and the lubricating oil in the air compressor brought out by the aircompressor piston. If the oil water separator is not used, the water and oil enter the pneumatic tool with the air, which will cause wind If the blade is stuck, once the tool is started, the blade will not be thrown away, and it may not even be able to start. If it can be started, the torsion will be insufficient. Be sure to pay attention to refueling regularly to keep the tool at normal torsion.