Feature

●Exquisite Workmanship: The straight air grinder is made of zinc alloy material and has comfortable handle with red protective cover, which is easy to operate and durable.
●For Grinding: The air grinding machine is used for local grinding of key areas, removal of solder joints and rust spots on metal products and so on.
●Package List: 1 x Air Die Grinder, 2 x Wrench, 1 x Air Inlet
●Low Work Noise: The pneumatic die grinder with muffler has low work noise and small vibration.
●Collet Size: Approx. 6mm / 0.24in or 3mm / 0.12in, No Load Speed: 22000rpm, Air Pressure: 90psi, 6.3kg/cm2, Air Consumption: 4.0cfm, Air Inlet: 1/4in


Description

How to Use:
1. Before and after daily use, please inject 2?3CC of #60 pneumatic lubricating oil from the air inlet.
2. Let the machine idle for a few seconds after filling with oil.
3. Generally, the air source compressed by the traditional air compressor contains water and lubricating oil in the air compressor brought out by the air compressor piston. If the oil water separator is not used, the water and oil enter the pneumatic tool with the air, which will cause blade stuck, once the tool is started, the blade will not be stretch, and it may not even be able to start. If it can be started, the torsion will be insufficient. Be sure to pay attention to refuelling regularly to keep the tool at normal torsion.

Specification:
Item Type: Air Die Grinder
Model: YDE 4975
Material: Zinc Alloy
Collet Size: Approx. 6mm / 0.24in or 3mm / 0.12in.
No Load Speed: 22000rpm
Air Pressure: 90psi, 6.3kg/cm²
Air Consumption: 4.0cfm
Air Inlet: 1/4in

Package List:
1 x Air Die Grinder
2 x Wrench
1 x Air Inlet