Feature

●[Durable Material] Made of high quality ABS material, wear resistant and small in size for long-lasting use. The dedicated analog circuit ensures high accuracy temperature and humidity measurement.
●[Safe And Reliable] Wide voltage range input power supply (10~30V) for safe and reliable operation. Beautiful and easy to install design, can be wall mounted or rail mounted.
●[IP65 Dust Resistant] Industrial wall mounted housing with IP65 dust resistant protection grade, ensuring protection against rain, snow, and dust while maintaining good air permeability.
●[High Accuracy] Industrial grade microprocessor chips and high accuracy temperature and humidity sensors provide reliability and interchangeability. Ensures precise temperature and humidity measurements.
●[4~20mA Analog Signal Output] Standard industrial interface with 4~20mA analog signal output, allowing easy connection to on-site digital display, PLC, inverter, and other industrial control equipment.


Description

Specification:
Item Type: Temperature Humidity Transmitter
Material: ABS
Product Size: Approx. 147 x 88 x 41 mm / 5.8 x 3.5 x 1.6 in
Anti Dust Protection Grade: IP65
Power Supply Wiring: Wide voltage 10~30V DC power input
Output Interface Wiring: The device is equipped with 2 independent analog outputs as standard
Weight: Approx. 157g / 5.5oz
Specific Wiring:
Circuit Identification Instruction
Power Supply VCC Positive Power Supply
GND Negative Power Supply
Output TH Positive Temperature Signal
Positive Humidity Signal
(Note: The device does not provide a communication line by default) Parameter:
DC Power Supply (Default) DC 10~30V
Maximum Power Consumption Current Output 1.2W
Voltage Output 1.2W
A Accuracy Humidity ±2% (60%，25℃)
Temperature ±0.4℃)25℃)
B Accuracy Humidity ±3% (60%,25℃)
Temperature ±0.5℃ (25℃)
Temperature Range -40℃~+120℃, default -40℃~+80℃
Humidity Range 0%-100%
Transmitter Circuit Working Temperature And Humidity -20℃~+60℃, 0%~95% A9:C28(non B25condensing)
Probe Operating Temperature -40℃~+120℃, default -40℃~+80℃
Probe Working Humidity 0%-100%
Long Term Stability Humidity ≤1%/y
Temperature ≤0.1℃/y
Response Time Humidity ≤8s(1m/s wind speed)
Temperature ≤25s(1m/s wind speed)
Output Signal Current Output 4-20mA
Load Capacity Voltage Output Output resistance≤250Ω
Current Output ≤600Ω
Hole Size 70mm/2.8in
Parameter Settings Set By Software Product Model:
RS- Company Codes
WS- Temperature And Humidity Transmitter, Sensor
120- 4~20mA Current Output

PackageList:
2 x Screw
2 x Expansion Tube
1 x Transmitter
1 x Manual