Feature

●The noise of the switch is small and has little effect on the speaker.
●The drift output voltage generally does not exceed 50 mV and is relatively stable.
●There is no need to do any debugging after installation, and beginners have a high success rate.
●The horn protection circuit can eliminate the impact noise of the power amplifier switch.
●It also prevents the DC output from burning out the horn when the power amplifier is damaged.


Description

Features:
The noise of the switch is small and has little effect on the speaker. The drift output voltage generally does not exceed 50 mV and is relatively stable. There is no need to do any debugging after installation, and beginners have a high success rate. The horn protection circuit can eliminate the impact noise of the power amplifier switch. It also prevents the DC output from burning out the horn when the power amplifier is damaged.

Specification:
Operating Voltage: Recommended dual DC 10 45V dual DC 35V
Rated Output Power: 100W (4 Ohm ± 35V)
Maximum Output Power: 150W (4 Ohm ± 45V) huge heat, not recommended
Spacing: Approx. 5.08mm / 0.20in
Pitch row Between Two Power Tubes: Approx. 47mm / 1.85in

Package List:
1 x 2SC5200+2SA1943 Power Amplifier Board