1. Offline Control: With the offline controller module, you can control the CNC router without connecting to a computer, so the CNC router can be placed anywhere you want, such as garages and workshops.
2. Manual Control: The XYZ axes position can be manually adjusted as the starting point for engraving. The module can also manually control the spindle on or off mode.
3. Simpler Access: After the file is put into the memory card, the engraving file can be directly recognized. You can also connect the offline module to a computer via a micro USB cable and store files directly.
4. Ideal Matching: The offline module is perfectly compatible with 3018, 3018 PRO CNC routers and other general purpose 3018PRO CNC routers.
5. Easier Working: You just need to connect the offline module to the GRBL controller board and then you can use this module to control the CNC router.
Spec:
Item Type: CNC Router Offline Control Module
Connection: USB, USB CH340.
Software: GRBL Controller, universal G Codes transmitter.
Input Voltage: 12-36V
Main Control Chip: For atmel 328P.
Stepper Motor Driver: A4988
Spindle Drive Chip: MOSFET, recommended 12-36V, within 10A.
Spindle PWM Speed Regulation: support
Support Stepper Motor: 12V, within 1.5A, it is recommended that the maximum current be less than 2A, stepper motor 42, 57.
Engraving: Supports
Power Interface: 5.5-2.5mm DC interface.
Package List:
1 x CNC Router Offline Control Module
1 x FC 8P Cable
1 x Memory Card
1 x Memory Card Holder
1 x User Manual
Note:
The router cannot be connected to the offline controller and the USB cable at the same time. Disconnect the USB cable from the router before connecting the offline controller.