[110v]
1 & 220vAC 1.5kw ER11 Air Cooled Spindle Motor 65mm 4 bearings
1 220v 15KW Inverter
1 65mm spindle bracket
Size65 x 204mm Body diameter65mm; Length:204mm)
Speed Ways:Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.
Cooling:Air cooling
Power:1.5kw (1HP=0.735kw)
Voltage:220vAC(If you need 110v/380v spindle ,please leave message to us,thank you)
Current:6A
Frequency:0-400Hz
Speed:0-24000rpm
Runout Off:0.01mm
Bearing Type:2X7002C P4 DT and 2X7002C P4 DT
Full sealed angular contact bearings
Collet:ER11
Clip diameter: 7mm,6.35mm,6mm,5mm,4mm,3.175mm,3mm,2mm,1mm
Air Cooling ER11 collet chunk
P4 fully sealed angular contact bearings ,2×7002 P4 DT &27002 P4 DTincrease spindle life
Longer length make the torque biggermore powerful
Carefull assembly make the spindle more precisional
Precision 001mmCoaxial degree less than 00025mm
Pay attention: The spindle size is 65 x 204mm mm, bigger torque.
Bearing is P4 grade,2×7002C P4 DT &27002C P4 DTincrease spindle life
High precisionrunout off less than 001mmCoaxial degree less than 0.0025mm
Power: 1.5kw
Input Voltage: 220v (±20%)
Input Phase: 1 or 3 phase
Input Frequency: 50-60Hz (±5Hz)
Output Voltage: 220v
Output Phase: 3 phase
Output Current: 7A
Output Frequency: 0-1000Hz
Control Method: V/F control; Open-loop flux control