Specifications:
Voltage: 110V, 0.1A
Power: 65W
Rotating speed: 4200r/min
Working table size: 165x165 mm
Machine size: 250*250*250 mm
Rotating shaft in grinding table (fine shaft with grinding head): diameter 0.7cm
Grinding wheel inner diameter: 0.79cm
Machine weight: 2.26kg
Color: Red
Application:
Suitable for grinding glass,ceramics and other hard and brittle material.
2. Two models of Grinding wheel for this machine, respectively, are mcbl1,mcbl58, we will send one free MCBL58Grinding Wheel
Inside the rotary shaft (the fine shaft of the grinding head) diameter: 0.7cm, Grinding wheel inner diameter: 0.79cm
Operation Note:
1. Can not grinding without water. Ensure the grinding wheel is wet
2. When using the grinding wheel, with small strength , dont use too much strength.Too much
strength will reduce grinding machine and the service life of the grinding wheel.
3. After using, clean the water reservoir. Remove the reservoir, clean up the rest of the residue
after grinding.
4. In order to prolong the service life of grinding machine, cleaning and add lubricant to the engine shaft, 25 hours after each use, remove all the grinding wheel and the fixed screw.
5. If the grinding wheel not be used for a week or longer,it need to grind down on stage to prevent the direct axis stick on.
This will help you to develop check engine shaft and wheel maintains a habit.
6. Dont grinding metal. If grinding metal, it will damage the grinding wheel and result in can not grinding glass any more.
Grinding wheel installation:
1. Before installation of grinding wheel, topped with lubricant, engine shaft grinding wheels need to apply a layer of lubricant inside.