[380v]
1 &1.5kw ER11 220v water cooled spindle 80x200mm 4 bearings
1 1.5kw inverter
1 80mm spindle bracketholder
Size80x200mmMiddle body diameter80mmxLength200mm)
Speed Ways:Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.
Cooling:Water cooling
Power:1.5kw(1HP=0.735kw)
Voltage:220vAC(If you need 110v/380v spindle ,please leave message to us,thank you)
Frequency:400Hz
Speed:0-24000rpm
Runout Off:0.01mm
4pcs fully sealed angular contact bearings
Bearing Type:2×7002C P4 DT& 27002C P4 DT
ColletER11
Clip diameter7mm 635mm 6mm 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm (standard 6mm)
P4 angular contact bearings ,2×7002C P4 DT& 27002C P4 DTincrease spindle lifeNew type4 bearings
Longer length make the torque biggermore powerful
Carefull assembly make the spindle more precisional
Precision001mmCoaxial degree less than 0.0025mm
1. Our Ceramic ball bearings spindle use4 pcs ceramic ball bearings.
2. Ceramic ball bearings are resistant tohigh temperatures and low heat, usually 3-5 degrees lower than steel ball bearings during using .
3. Ceramic ball bearings havelow friction,low noiseandlong service life.
4. If you want to use the spindle for aluminum, then ceramic ball bearings better than steel ball bearings.
Inverter Type: 220v 1.5kw
Input Voltage:220V(+/-15%) ,We also stock 380V(+/-15%), please contact us for item stock.
Output Voltage:220vAC
Input Frequency:48-63 Hz
Output Frequency:0-400 Hz
Input Phase:1 or 3 phase(Support 1 phase input, also support 3 phase input)
Output Phase:3 phase