Description
-- The operation steps of the mill
-- Install the grille according to the assembly instructions.
-- Install the diamond drill bit on the grinder.
-- Fill the water tank with less than 200ml.
-- Open the switch and start grinding.
-- Install Bits
-- Install worksurface, worksurface adapters and bit.
-- Slide the bit onto the motor shaft with the set screw on the flat side of the motor shaft. Position the bit on the arbor so that the diamond surface is exposed at least 1/8 inch above the work surface.
-- Secure the bit to the arbor by turning the set screw clockwise with the hex wrench.
-- Important Info: Always attach the bit to the flat side of the motor shaft. Tightening the drill on the rounded side can scar the stem and prevent its removal!
-- Remark:
Please allow 1-3mm error due to manual measurement.
Due to the light and screen difference, the items color may be slightly different from the screen.
-- Specifications:
Blue color
Weight: 2.8kg
Net weight: 2kg
Size: 195*195*160mm
Voltage: 220v