Feature

●Made of durable carbon steel, it has high hardness and is not easy to rust. It can meet all your daily needs
●Easy To Use -------- 1. Drill a hole to the recommended diameter. 2. Tap the anchor into the hole until it is flush with the surface of the substrate. 3. Attach the setting tool to the head of the screw.Squeeze the to expand the anchor. 4. the screw and place it through the fixture then back into the anchor. Tighten the screw until the fixture is fixed.
●Fast Installation with Manual or Pneumatic Tools -------- The tool makes it easier. You can you 2 wrenched or pliers.1 to hold the rivet nut so it does not spin after you insert it into the hole. Thread the right size screw into the nut. Tighten the nut with the other wrench/plier. As you tighten the screw/bolt, the nut will crimp and hold in place. Dont over tighten or you may strip the thread.
●Jack Nuts with Screws for Anything Really -------- Used these jack nuts to replace missing lower third bolt hole on a squarebody side mirror. The do seem to be in the light strength side however for a mirror use etc would highly recommend it.
●Warm Notice -------- Just need to select the appropriate tip and not install the guide so as to allow you to get closer to the jack nut flange. Again these are light weight use have not had the need to put something heavy 1 them either.

[M6 Nut (5pcs)]

[Black M6x25(4set)]

[M6x20 (5set)]

Description

Color:Black
Material：Carbon Steel
Type：Rivet Nuts
DIY Supplies：Metalworking
Model Number：M4 M5 M6
Package Including:According to your choose!
Note:
Please allow minor error due to manual measurement. Thank you!
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.