Feature
●Generator Controller is an outstanding compact control module that provides a comprehensive range of features for single-set applications.
●Generator Set Start & Protect: Used to start and protect a single generator set, realize the manual and remote start and stop of the generator set, data measurement, alarm indication, shutdown protection, etc.
●Light touch button operation to achieve precise measurement of various parameters, all configuration parameters can be adjusted from the front panel of the controller
●Reliable Operation Easy Installation: generator set controller has the advantages of simple operation, reliable operation, compact structure, and convenient installation
●embedded installation method, small size and easy installation
[Mgc120]
Description
Overview
MGC120 Petrol Genset Controller belongs to AMF module, which is suit for single petrol genset automation and monitoring control. It can realize auto start/stop genset, alarm protection and ATS switching control functions by data measuring. The controller applies LED display and button-press operation. Most parameters can be adjusted from the front pannel of the controller and all parameters can be changed by PC sofware via LINK port. With simple operation, reliable performance, and compact structure and convenient installation advantages it can be widely used in various automation system for petrol genset.
Performance and Characteristics
--Able to collect single phase voltage of Mains and generator, which is suitable for 50Hz/60Hz AC system;
--Switchable display parameters:
Mains voltage (V)
Generator voltage (V)
Engine cylinder temperature ()
Generator frequency (Hz)
Battery voltage (V)
Accumulated running time(H)
--Equipped with Mains electricity monitoring function and AMF function;
--Protection function for generator under/over volt, under/over frequency, low oil pressure, and start failure protection functions; when they occur, LED indicates alarm types, and controller
conducts shutdown protection;
--Using stepper motor and programmable outputs to control air flap;
--Speed signals derive from ignition coil primary (diode needs to be in series);
--Equipped with 3 stationary relay outputs (fuel output, start output and ignition control);
--Equipped with 2 programmable transistor outputs, which can be set as common alarm output, ETS control, idle speed control, preheating control, GCB close output, MCB close output and air flap blocking output;
--Digital tube and LED display with button-press operation;
--Silicone panel and buttons with higher ability to adapt to extremely high/low temperature;
--Screen protection adopts hard screen acrylic material;
--Modular structure de