How to Use
1. Remove any dirt from between the upper and lower pressure plates of the rubber ring before testing.
2. Loosen the airbag knob switch to the open position.
3. Fill the lower platen drain valve with an appropriate amount of clean water.
4. Place the test object between the upper and lower platens.
5. Then tighten the airbag knob switch to OFF and turn the handwheel to lower the upper platen until the upper and lower platens are completely sealed.
Specification
Model: YJ-1200
Color: Blue
Material: 45# Steel, Aircraft Aluminium
Surface Treatment: High-temperature Baking, Anodising
Executive Standard: In Line with gb4744-84, But also in Line with iso-811
Measuring Range: Plastic Bags, Clothes, Tents, Raincoats, Cloth, etc.
Technical Parameters: The Sample Level is Placed, Under the Pressure of the Sample
Pressure Area: 100cm², d=11.28cm
Water Column Height: 0 - 10000mmH2O
Rising Speed: 10 ± 3mmH2O (Standard Rate) 60 + 20 mmH2O
Standard Rate: 100 ± 30 mmH2O (Increase Rate)
Sensitivity: 1mmH2O, Maximum Display Value 9999.9mmH2O
Gross Weight: 6kg/13.23lbs
Product Size: 17.2*25.2*28cm/6.77*9.92*11.02inch
Package Size: 30*40*38cm/11.81*15.75*14.96inch
Package Included
1* Waterproof Testing Machine
1* Water Pot
1* Pressurised Accessory
1* English Manual
Notes
1. Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
2. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you place the order.