Feature

●The nitrogen gas spring cylinder body has a C shape notch on the upper and a U shape notch on the bottom with M6 screw holes, which is easy to install.
●After the special process of fine processing, the hardness is high, and the surface roughness reaches about Ra0.02um.
●350 series nitrogen gas spring has an initial spring force of 3600N, long stroke and stable operation.
●The cylinder body of the gas spring adopts an integral cutting process to ensure that the product is safer and more reliable.
●The cylinder diameter of the nitrogen gas spring is 31.9mm, and the plunger diameter is 16mm, which makes the installation and use more precise.


Description

Specification:
Item Type: Nitrogen Gas Spring
Material: Alloy
Purpose: Die compression nitrogen cylinder
Cylinder Diameter: Approx. 31.9mm / 1.3in
Plunger Diameter: Approx. 16mm / 0.6in

Package List:
1 x Nitrogen Gas Spring
1 x Storage Box

Note:
1. Do not use the nitrogen gas spring plunger rod for fixing, and the threaded hole at the end of the piston rod cannot be used as a lifting hole for lifting.
2. Do not modify the following aspects of the nitrogen gas spring:
(1)Drill holes on the cylinder block of the nitrogen gas spring, the sealing ring, etc.
(2)The piston rod is shortened in order to reduce the stroke
(3)Do not perform other processing on the nitrogen gas spring and its accessories
3. Do not use nitrogen gas springs for purposes outside the scope of product catalog specifications.
4. Do not allow the gas spring to return freely after being compressed, as this will cause damage to the internal structure.