Dimensions :
Interior diameter : 30.8mm
Exterior diameter : 84.5mm
Poles Thickness : 21mm
Poles Width : 17.8mm
Other Specifications :
Number of wires: 4
Number of pins: 4
Number of plugs: 2
Number of fixation holes: 2
Number of poles: 12
REPLACEMENT PART NUMBER:
5UM-81410-31
Fitments:
Fit for GAS GAS EC250F Enduro 4T 2013-2015
Fit for GAS GAS EC300F Enduro 4T 2013-2014
Fit for GAS GAS EC300F Racing 4T 2015
Fit for GAS GAS EC450F Enduro 4T 2014
Fit for GAS GAS EC300F Racing 4T 2015
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)
Package Included:
1x Generator Stator Coil
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.