Hot Melt Nut Insertion Machine Copper Nut Implanter Thermal Implant DIY 110V-220V

Feature:
All-metal body, screw height adjustment, high verticality, to ensure processing accuracy
Digital temperature control to meet the needs of different hot melt nuts
There are two modes of manual pressing and semi-automatic pressing, which can be operated by left and right hands
V-groove aluminum profile design, you can install tooling or expand the panel by yourself
Screw stroke adjustment for more precise positioning
The guide column and steps of the thermal head are consistent with the height of the nut, which has good thermal conductivity and can guide the nut at the same time to prevent crookedness
Complete accessories: heating core, and conversion head, suitable for M1.4 M1.6 M2 M2.5 M3 M4 M5 M6

Operation:
Take out the heating core and install it into the fixed block
Put the handle into the heating core and screw it to the fixed block
Select the type of thermal head and install it on the bottom of the heating core
The handle is connected to the digital display temperature control device
Turn on the temperature control device, and it can be used after five minutes of preheating

Parameter:
Input voltage: 110V-220V
Power: 108W
Temperature adjustable: 180℃~480℃
Equipment bottom plate size: 170*160mm
Maximum operating height: 230mm

Attention:
The heating core is a consumable and needs to be replaced after long-term use
In order to protect the life of the heating core, please adjust the appropriate temperature according to the hot-melt material, and it is recommended not to exceed 380°C
The inside of the heating core head is made of copper, so it is not suitable to twist or hit hard
Digital display temperature control, can not be connected to the transformer