Feature

●Replacement for Nissan 240Z 1970 2.4L Petrol, 260Z 1975 2.6L Petrol, 810 1981 2.8L Diesel
●Replacement for Nissan D21 1990-1994, Frontier 1998-2004, Pickup 1994-2004---2.4L Petrol Pickup
●Replacement for Nissan Maxima 1981-1983 2.8L Diesel Pickup, Xterra 2000-2004 2.4L Petrol Pickup
●Rotation: Standard Rotation, Clockwise
●Reference Number: 2570, 2560, 46000, 922560, FCN-001, 1540317


Description

33

The cooling fan clutch is a cooling system component that controls the operation of the engine cooling fan. When the engine overheats, the radiator needs the help of the cooling fan to blow air into the device. After the engine reaches the proper operating temperature, the fan clutch will be mechanically disengaged, thus saving some power for your vehicle.

11

Item Specification

Item Type: Engine Cooling Fan Clutch

Placement on Vehicle: Front

Material: Steel

Rotation: Standard Rotation

Reference Number: 2570, 2560, 46000, 922560, FCN-001, 1540317

Vehicle Information

For Nissan:

  • 240Z 1970 I6 2.4L Petrol
  • 260Z 1975 I6 2.6L Petrol
  • 810 1981 l6 2.8L Diesel
  • D21 1990-1994 l4 2.4L Petrol Pickup
  • Frontier 1998-2004 l4 2.4L Petrol Pickup
  • Maxima 1981-1983 l6 2.8L Diesel Pickup
  • Pickup 1994-2004 l4 2.4L Petrol Pickup
  • Xterra 2000-2004 l4 2.4L Petrol Pickup

  • Please confirm the vehicles model, year as well as the engine size when you purchase!
11

How to Judge Whether the Fan Clutch Fails

  • Engine overheating: When the fan clutch fails to engage or work properly, as a result, the engine may fail to operate at an acceptable temperature range.
  • Excessively loud cooling fans: If the fan clutch gets stuck in the engaged position, this may result in an excessively loud engine from the fan blowing at full speed.
  • Pay attention to changes in air temperature: Switch on the A/C and turn it down to the coldest setting. If it fails to cool down after several minutes, or seems to be emitting unusually warm air, there could be a problem.
  • Check the appearance of the fan clutch: Examine the unit’s general condition, you’ll be able to tell right away if something is out of place or there’s any major structural damage.
  • Spot-check for oil leaks: Run your finger along the edges of the bearing seal on the backside of the fan clutch. If it comes away with a heavy coating of oil, the culprit is either a crack or a faulty seal.

How to Replace a Bad Fan Clutch

11

22

33

Removing the Fan

Mechanically driven fans with four bolts

Loosen the bolts in the fan cover to remove the fan. After that, disconnect the fan shroud and remove the shroud. Pull out the nut that secures the fan to the pump pulley, hold the fan and pull it forward with a slight rocking motion until the fan is loose and finally comes out.

Cooling fan with large nut

Disconnect the fan sealed by the large nut. Insert it around the bolt on the pulley. Use a large wrench to turn counterclockwise to loosen the nut.

Disconnecting the Clutch From the Fan

Set aside the detached fan. Make sure that the shaft is up. Use the suitable socket and ratchet to remove the bolts that fasten the clutch to the fan.

Installing the New Fan Clutch

Align the new fan clutch in the position and secure it to the fan by tightening the bolts. After that, reassemble the fan and shroud.

The replacing steps are only for reference, and we recommend you to ask the technician to do the installation.

Product information