Feature
●Removable Rails -- You will receive 10 terminal blocks with rails (a total of 20 guide rail clips). The rail acts as a fixing but is also removable, when the rail is removed it is a 2 in 8 out terminal block that can be used in tight spaces.
●Safe and Durable - The shell is made of nylon PC material, which has effective flame retardant, insulation, anti-corrosion, anti-aging and anti-electrocution properties. The contact points for cable insertion is designed with red copper contacts with strong conductivity.
●Efficient and Convenient - Strip off the end of the wire (9-10mm), gently push the clip to the top 90°, then insert the cable and close the switch, one plug and one press, no tools needed, two seconds to wire, and the inserted wires are neat and orderly.
●Wide Compatibility - This rail type tap terminal can support accessing hard wire with a diameter of 0.75mm ²- 4.0mm ²/AWG 28-12， Flexible wire diameter 0.75mm ²- 2.5mm ²/AWG 28-12.
●Wide Usability - Suitable for various situations of building and daily home wiring, such as sockets, switches, speakers, lighting fixtures, fans, etc.
[2 in 8 out (10pcs)]
[2 in 10 out (10pcs)]
Description
Product name: DIN Rail Terminal Blocks (2 in and 8 out)
Details:
1. This wiring terminal adopts a multi in, multi out design to meet various wiring needs, and also comes with a guide rail, which is convenient for fixing when you use it;
2. The contact material is red copper, and the shell is made of nylon PC material. It not only has strong electrical conductivity, but also has advantages such as insulation, flame retardancy, high temperature resistance, and wear resistance;
3. Compact in appearance, with a size of 43.8mm * 43.63mm (W * L), multiple strands of flexible wire and single strand of hard wire can be directly inserted, making it fast and safe;
4.Shell material: nylon PC;
5.Spring material: stainless steel;
6.Contact material: red copper;
7.Operating Temperature: -20℃-105℃;
8.Rated current/voltage: 32A/600V;
9.Packaging content: including 10 DIN rail terminal blocks and 20 detachable rail clips.
Usage:
Step 1: Strip the outer skin of the wire 9-10mm;
Step 2: Remove the handle of the wiring booster (the stripped wire should be inserted low and not exposed);
Step 3: Insert the wires in sequence and press the handle (if you need to remove the wires, open the booster upwards to remove the wires).
Applicable scenarios:Suitable for various situations of building and daily home wiring, such as sockets, switches, speakers, lighting equipment, fans, etc