Feature

●?【DIGITAL TO ANALOG 】-PWM converts digital to analog (0 to 10V).
●?【PARAMETER】-The digital input signal can be 5V or 24V with PWM signal from 0 to 100%.
●?【0-10V OR 0-5V】-The analog output signal can be 0-10V voltage or 0-5V voltage.
●?【APPLICATION】-Can be used for industrial panel PLC or other signal interface circuit. This module is easy to wire and convenient to use.
●?【GUARANTEE】-The quality of our products is guaranteed and you can use it without hesitation. Questions will be asked during use, do not hesitate to contact us.


Description

Specification:
Condition: 100% brand new and high quality
Current: .12mA
Power supply input voltage: 12-30V
Size: Approx. 5 x 4.5cm/1, 97 x 1.77 inch
Weight: 20g
Quantity: 1 piece

Using method:
PWM signal input frequency range: 1kHz to 3kHz PWM signal input range: 4, 5V to 10V to , jumper inserted at 5V. This type of signal mainly for traditional industrial control board (like for board), for 5V the CPU interface. 12 to 24V to , jumper inserted at 24V. This type of signal mainly for traditional PLC interface
Explanation of 0-10V analog voltage output:
When the signal input is not connected, the output will output 0V. When we turn on this module for the first time, we better calibrate it: find a signal with a 50% duty cycle, connect it to DIN-, DIN +, the amplitude corresponds to the corresponding bridge. If the frequency is between 1 kHz and 3 kHz, use a multimeter to test AO, GND. The meter should read around 5.4V. We adjust the potentiometer on the converter module to create multimeter readings around 5.4V. After that we have that Pulse signal calibrated and adjusted with this converter module. The module has a definition of 0.1V. Output current 10mA. When the duty cycle is opposite to the voltage, we can select the PWM output pin STEP LOW/ACTIVE for the software.

Package Included:
1 x PWM Signal Voltage Converter

Note:
After power on, if there is no input signal, the output is 0V. Output is only at Input.