Type: Effects
Modes:Delay and reverb effects with tap tempo functionality.
Input:1/4" mono audio jack.(Impedance: 1 meg Ohms)
Output:1/4" mono audio jack(Impedance: 100 Ohms)
Power requirements: AC adapter 9V , center negative.(Highly recommend to use Mooer Micro Power.)
Current Draw:300mA
Package Size: 12 * 7* 6cm/ 4.7 * 2.8 * 2.4in
Package Weight: 190g / 6.7oz
Features:
dual channel preamp
Independent 3 band EQ, Gain and Volume controls for each channel
Speaker cabinet simulation on/off
2 different modes for footswitch operation. On/Off or channel A/B
DCIN:Connect a 9V 300mA centre pin negative power supply
INPUT:Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.
OUTPUT:Connect to a power amp or your amplifiers effects return.(Highly recommend using a tube amplifier)
Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes.
Note: You can connect your "fx loop" effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)
Note:
1.Power adapter is not included.
2.Please use the 9V power adapter whose polarity is positive pole outside and negative pole inside. Otherwise, the product may not work properly.
Package Includes:
1 * Guitar Effect Pedal
1 * User Manual
Please Note:
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. Please refer to the actual product received.
2.Due to the manual measurement and different measurement methods, please allow 1-3cm deviation. Thanks!
Aluminum alloy casting surface, fashionable appearance, suitable for most audio equipment and electric guitars.