[901-c2]
Description:
The DC6-12V High Voltage Pulse Generator Inverter Super Arc Pulse Ignition Module is the perfect solution for high school science experiments, electronic instruments, negative ion generators, and small-scale scientific projects. With an input voltage range of DC6-12V, it efficiently converts the power to a powerful DC high voltage output of approximately 10,000V. This output voltage creates 1-2 cm arcs, enabling a wide range of applications.
Specifications:
- Model options: 901-2 (continuous operation for 10 seconds) or 901-c2 (continuous operation for 1 minute) [Note: Do not exceed the recommended working time]
- Input voltage: DC6-12V
- Input current: 1A-3A (dependent on the input voltage)
- High-pressure type: Pulse high and low pressure integrated
- Output voltage: Approximately 0.5-1 million V (ensure safety precautions during usage)
- Discharge distance between high-pressure poles: 10-20mm
- Output high-voltage wire length: Approximately 100mm
- Input power wire length: Approximately 100mm (positive wire indicated as red)
- Size: 86*25mm / 3.4*1in
- Weight: Approximately 63g~72g / 2.2oz~2.5oz
Please note:
1. Avoid high-voltage no-load power supply. Before energizing, adjust the appropriate distance of the high-voltage cable end. The arc-pulling distance is directly related to the voltage and battery capacity used. When measuring arc distance, start with shorter distances and gradually increase.
2. Exceeding the maximum arc distance is strictly forbidden, as the high voltage energy cannot be released and may cause module damage.
3. For input power, you can use two 3.7V lithium batteries in series, such as the 18650 battery or idle cell phone batteries (after removing the protection board) with a recommended capacity above 2000mAh. Alternatively, -/Ni-mh battery packs or 6V -acid batteries can be used.
4. Please be aware that the product type (new or old) will be sent