Specification:
Item Type: 6 Terminal Encoder
Material: Aluminum Alloy
Rotation Table Diameter: Approx.80mm/3.1in
Output Pulse: 100PPR
Working Voltage: 5V
Output Mode: Long line output
Package List:
1 x 6 Terminal Encoder3 x Accessory
1 x Manual
Note:
1. The encoder is a precise instrument, it is forbidden to knock, drop, collide, etc. during the installation process. Improper installation or use will affect the performance and service life.
2. Do not over load.
3. Be careful not to exceed the limit speed of the encoder during use, if the speed exceeds the limit, the electrical signal of the encoder may be lost.
4. The wiring must be correct, if the wiring is wrong, the internal circuit of the encoder will be damaged. Insulate the unused cables before the initial startup.
5. The maximum response frequency is limited to the maximum speed.