[1.5 inch with brake]
[2 inch with brake]
[1 inch]
[2 inch]
[1.5 inch]
1.5 inch | Wheels size | 1 inch |
200 LB | Max load | 120 LB |
Nylon | Material | Rubber |
plate | Installation method | plate |
Brake | ||
| Swivel |
1.5 inch | Wheels size | 1 inch |
200 LB | Max load | 120 LB |
Nylon | Material | Rubber |
plate | Installation method | plate |
Brake | ||
| Swivel | |
1.5 inch | Wheels size | 2 inch |
200 LB | Max load | 400 LB |
Nylon | Material | Rubber |
plate | Installation method | plate |
Brake | | |
| Swivel | |
1.5 inch | Wheels size | 1.5 inch |
200 LB | Max load | 200 LB |
Nylon | Material | Nylon |
plate | Installation method | Stem |
Brake | | |
| Swivel | |
This is a modal window.
Leave the mark of the hole.
Drill the holes at the marked positions with an electric drill (the diameter of the drill bit must not be larger than the diameter of the screws)
Put the caster on the corresponding board and tighten the screw.
Installation completed.