NF-8209 Network Cable Tester has three modes for options to track cable like AC filter mode, analog mode and PoE mode. That means it’s equipped with the most powerful cable location technologies for any work environment. Also, it includes cable length measurement,cable faults testing,PoE testing, hub blink and NCV function.
|
|
|
---|---|---|
POE Testingidentify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard). Test CAT5e, CAT6, CAT6a (STP & UTP) |
Port FlashLocate network port by the flashing port light on Hub / Switch. Available to 10M/100M Hub/switch. |
TDR techonology Lenth MeasurementUse TDR techonology for cable length test. Cable length testing accuracy can be up to 97%. Please note testing range must be 10m-200m, otherwise it would display 0 meter. |
|
|
|
---|---|---|
Continuity TestingCONT-Test open, short, cross, etc for STP, UTP cable. Detect AC voltage presence (50V-1000V) |
Three Cable Scan ModeThree scan modes selectable: Digital mode/ Analog mode/ PoE mode |
Possible results on the lineIf the LCD screen display "Cable Open", there are several reasons for this. |
|
|
|
---|---|---|
|
|
|
Length/Cable type | CAT5、CAT6 (STP & UTP) |
Length/Test range | 10~200m |
Length/Accuracy | ±1.6m |
Length/Breakage location | Yes |
Scan/Max. signal voltage | 8Vp-p |
Scan/Frequency | 130KHz |
Scan/Max range | 600m |
POE/Test range | DC 5~60V standard / non-standard PoE switch |
POE/Voltage display | Yes |
POE/PSE type | IEE?E 802.3af/at |
LCD display | 128*64 Dot-matrix with backlight |
Power supply | AAA*3 (Not included) |
Low battary warning | 2.7V |
Auto-off time | 15min、30min、60min、OFF |
Voltage protection | DC48V 5mA |
Max working current | <150mA |
Sentivity adjustable | Yes |
AC Voltage detecting | Yes |
Lamp | Yes |
Battary type | 9V*1 (Not included) |
Low battary warning | 6± 0.5V |
Max working current | <100mA |
Remote/Wiremap Port | RJ45 |
Remote/Voltage protection | DC48V 5mA |