Feature

●Extremely stable performance: This thread helical coil repair tool kit is made of high speed steel and red color plastic handle, sturdy and durable in use and can be used in daily repair, car repair, drilling machine, etc; Made of stainless steel of good rust and resistant.
●Excellent practicability: The wire screw set is placed in the screw hole of the workpiece such as aluminum alloy to form a standard internal thread with high strength, wear resistance and high precision. Typical applications: high voltage switchgear, microwave communication, automotive parts, air separation equipment, radiators, etc.
●Cost effective thoughtful kit: The use of wire screw sleeves for mm ---inch threaded hole conversion is convenient and fast. The imported equipment or mechanical inch thread is damaged, and it needs to be changed to mm thread due to the supply of spare parts; All accessories are integrated in a box for convenient transportation and carriage.
●Definitely recommend: Thread helical coil repair tool kit is ideal for restoring damaged threads, suitable for engine repair and otherautomotive applications for steel, cast Iron and aluminium. This kit helps create a stronger internal thread in soft metals and protects tapped threads against wear and damage.
●Package list: 1 x Spiral drill; 1 x Screw tap; 1 x Wrench; 1 x Break pin tool; 1 x Hex wrench; 10 x Thread repair insert; Thread Insert Size: M14x1.5; Length: 2D.


Description

Specification:
Item Type:Thread Sleeve
Material:Stainless Steel
Thread Insert Size:M14x1.5 Length:2D

Package List:
1 x Spiral Drill
1 x Screw Tap
1 x Wrench
1 x Break Pin Tool
1 x Hex Wrench
10 x Thread Repair Insert

Note:
Instructions
Drill holes using a matching drill bit.
Use wire threaded (special) tap tapping, the tapping depth must exceed the wire screw sleeve mounting length.
Insert the wire screw into the mounting wrench with the tail down. Turn the wrench handle to screw the wire screw into the threaded hole.
Use a break pin tool to align the mounting handle (tail) with a hammer to strike the punching tool and the tail handle can be removed.
When there is a problem with the installation of the threaded screw sleeve, (such as a jumper), the threaded sleeve can be taken out by the wire threading tool.