1. EXCELLENT PERFORMANCE: High voltage differential probe has ultra low noise, excellent amplitude frequency characteristics, high common mode rejection ratio, helping you easily handle various high frequency and high voltage signal tests.
2. HIGH ACCURACY: The has excellent bandwidth flatness, amplitude fluctuation less than 0.5dB within its half bandwidth range, even in high frequency bands can also maintain high accuracy.
3. 5MHZ BANDWIDTH LIMIT: Effectively eliminates high frequency noise and interference when measuring FET switching frequency in most switching power supplies.
4. ONE KEY ZEROING: Short circuit the differential probe test pen, press button, the probe can be zeroed quickly.
5. DUAL RANGE SELECTION: The oscilloscope probe supports dual range selection, improve signal to noise ratio, meet more test requirements.
6. UNIVERSAL BNC INTERFACE: Designed with standard BNC interface, this probe can work with any oscilloscope, with Type C, can be powered directly from oscilloscope USB port.
Spec:
Item Type: Oscilloscope Probe
Material: ABS
Model: MDP3000
Bandwidth: 100MHz
Rise Time: ≤3.5ns
Attenuation: 100X 1000X
Accuracy: ±2%
Maximum Input Division Voltage (DC+AC pk): 300V (100X), 3000V (1000X)
Maximum Ground Voltage: CAT III 1000V
Bottom Noise:
Full Bandwidth: 100X: ≤0.9mVrms, 1000X: ≤0.4mVrms
5MHz Bandwidth Limit: 100X: ≤0.4mVrms, 1000X: ≤0.35mVrms
Common Mode Rejection Ratio: DC: >-80dB, 100kHz: >-60dB, 10MHz: >-30dB, 100MHz: >-26dB
Delay Time: 11.99ns (100X), 12.27ns (1000X)
Input Impedance: 20MΩ/1.5pF (differential), 10MΩ/3pF (single end to ground)
Output Voltage: ≤3V
Power: 2W
Power Supply: Type C interface
Overload Indication: LED alarm, buzzer
Size:
Control Module: Approx. 91x33x15mm/3.6x1.3x0.6in
Signal Box: Approx. 100x36x20mm/3.9x1.4x0.8in
Input Line Length: Approx. 8cm/3.1in (manual measurement may have slight errors)
Output Line