Feature

●【High Voltage Probe】DPs series high voltage differential probes, specially designed for the measurement of high?voltage differential signals
●【Portable Design】The power supply adopts USB DC 5V output and has a USB interface, which is easy to use and carry
●【Safer to Use】High?voltage differential probes sample high?impedance isolation between input and output to protect person safety
●【Applications】Convert the input high voltage signal to low voltage signal for oscilloscope observation and analysis
●【Widely Used】The attenuation rate is 10X, which can be used in any brand of oscilloscope, meet the needs of floating measurement


Description

Specification:
Condition: Brand New
Item Type: Oscilloscope Probe
Material: ABS
Model DP10007
Bandwidth 100MHZ
Rise Time 3.5nS
Attenuation 10X
100X
Accuracy ±1%
Maximum Input Differential Voltage (DC+AC) 70V (10X)
700V (100X)
Maximum Common Mode Input Voltage CAT II 600V
CAT I 1000V
Reference Noise ≤15m Vrms(10X)
≤60mVrms(100X)
Common Mode Override Ratio ≤-80dB at 50HZ
≤-50dB at 1MHZ
≤-60dB at 20KHZ
≤-40dB at 10MHZ
Input Resistance 8MΩ/1.25pF (Differential)
4MΩ/2.5pF (Single End to Ground)
Output Voltage ≤7V
Power 1.25W
Power Supply DC 5V, USB Power Supply
Overload Indication Button Light Flashes
Size Approx. 14.5x6x2.7cm / 5.7x2.4x1.1in
Input Line Length Approx. 45cm / 17.7in
Output Line Length Approx. 90cm / 35.4in
Temperature 0℃-40℃
Humidity 10%-85%
Operation Instruction
1.Power Supply:
USB DC 5V Output, more portable while oscilloscope have USB interface.
2.Ground the Product:
To avoid electric shock, the grounding conductor must be connected to earth ground. Before making connections to the input or output terminals of the product, ensure that the product is properly grounded.
3.Probe Connection:
Connect probe power input port to USB cable power output port, then connect the probe BNC port to oscilloscope or other instruments BNC port, set proper attenuation rate, and connect the probe with the measuring object.
4.Measurement:
You should estimate the tested voltage amplitude before testing, do not use if exceeds the voltage range.
5.Probe Disconnection:
First disconnect the inputs from the tested points,and then unplug the probe output and power input

PackageList:
1 x Probe
2 x Clip
2 x Probe Hook
1 x USB Cable
1 x Plastic Box
1 x Manual