Feature

●【High Impedance Isolation】: High voltage differential probes test high impedance isolation between input and output to protect peoples safety.
●【Oscilloscope Probe】: DP series high voltage differential probes, specially designed for the measurement of high voltage differential signals.
●【Usb Interface】: The power supply adopts DC 5V USB output and has a USB interface, which is easy to use and carry.
●【Signal Conversion】: Convert input high voltage signal to low voltage signal for oscilloscope observation and analysis.
●【Wide Uses】: 10X attenuation rate suitable for use with any type of oscilloscope.


Description

Specification:
Condition: 100% Brand New
Item Type: Oscilloscope Probe
Material: ABS
Model DP10007
Bandwidth 100MHz
Rise Time 3.5nS
br>Dimming 10X
100X
Accuracy ±1%
Maximum input differential voltage (DC+AC) 70 V (10X)
700 V (100X)
Maximum mode input voltage common CAT II 600V
CAT I 1000V
Reference noise ≤15mVrms(10X)
≤60mVrms(100X)
Common mode nulling ratio ≤-80dB at 50HZ
≤-50dB at 1MHZ
≤-60dB at 20KHZ
≤-40dB at 10MHZ
Input resistance 8MΩ/1.25pF (differential)
4MΩ/2.5pF (single-ended to ground)
Output voltage ≤7V
Power 1.25W
DC 5V power supply, USB power supply
Overload indication button light flashes
Size approx. 14.5 x 6 x 2.7 cm / 5.7 x 2.4 x 1.1 inches
Input Line Length Approx. 45cm/17.7in
Output Line Length Approx. 90cm/35.4in
Temperature 0℃-40℃
Humidity 10%-85%
Operating Instructions
1. Power supply:
USB output DC 5V, more portable while the oscilloscope has USB interface.
2. Ground the product:
To avoid electric shock, the grounding conductor must be connected to the ground. Before making connections to the products input or output terminals, make sure the product is properly grounded.
3. Probe connection:
Connect the power input port of the probe to the power output port of the USB cable, then connect the probe BNC port to the oscilloscope or other instruments BNC port, set the appropriate attenuation rate and connect the probe with the measurement object.
4. Measurement:
Must estimate the tested voltage amplitude before test, do not use it exceeds the voltage range.
5. Probe disconnection:
Disconnect first