Feature
●Circuit wiring set compatible for LP SG EPI Style electric guitar, Material: Metal and wire, Switch Cap: White
●2 volume / 2 tones / 3 way switch, 2 capacitors, 1 input jack socket, prewired components make for an easy install, each tone pot has its own 2A473J capacitor, as well replace all the electronics.
●2 Volume and 2 Tone Knob Pots: 2 B500k full size potentiometer, 2 A500k full size potentiometer, Pots Shaft length: approx. 18mm / 0.71", Base diameter: approx. 16mm / 0.63", Switch: Approx. 18 x 28 x 49mm / 0.71 x 1.1 x 1.9 inch
●2 tone potentiometers with the green capacitors and 2 volume potentiometer with no capacitor, pots are smooth and consistent, switch is excellent and cool that it came with a white tip
●Wiring diagram as the picture seventh shown, this harness is completely prewired. All you need to do is solder your pickups to the switch and ground them to the volume pots, more instructions please help to see the description as below. (Any other problem about product or replacement, please help to contact the seller, The way to Contact Seller: Find your order -- Contact Seller, thanks.)
[Black Cap]
[White]
[Cream]
Description
This harness is completely prewired, all you need to do is solder your pickups to the switch and ground them to the volume pots
Instructions:
How to soldered the wire, the 2 B500k potentiometers? (volume pots) both have 3 posts:
1. One B500k Pots: the hot wire of pickup is going to connect the center lug of volume, the ground wire of pickup is going to connect the anywhere on the top of potentiometers .
2. Another B500k Pots: The opposite of connect, the ground wire of pickup is going to connect the center lug of volume, the hot wire of pickup is going to connect the anywhere on the top of potentiometers.
In other words, On this harness, solder the hot side of your pickup to the wiper (center lug) of the volume pot...which is the pot that does NOT have a capacitor attached to it. Yes, you can ground it to the body of the pot....or the lug thats folded over and grounded to the pot. Dont forget to tie in your bridge ground wire, which can be soldered to any convenient ground in the circuit! And you can also choose that the ground wire dose not need to connect. Good luck!
Another way of connect the tone pots, you can also solder the pickup wire into the A500k potentiometers(tone pots) as the above method, hope this will help you.
The instructions are on a youtube video building guitars.
Material: Plastic & metal
Switch Cap: Black
LP Wiring Harness 2 Volumes / 2 Tones / 3 way switch
2 x A500k, 2 x B500k Pots with 18mm Shafts, Base Dia: 16mm
Package Included:
1 x Wiring Harness for Gibson guitars
Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Any problem you faced about our items, please freely make us know, we will response within 24 hours, and try our best to solve it for you, thanks in advance !